Small Conveyor GUF-P MINI for small and lightweight parts
Variantes: L1500xW150 mm, w/o MPS
The GUF-P MINI is a belt conveyor with a modular profile design for transporting small and lightweight parts with low volumes. Thanks to its minimal installation height, this conveyor is ideal for integrating into complex systems where space is at a premium. Since the belt recirculation is integrated in the conveyor frame, the conveyor can be placed directly on the machine bed. The small diameter of the drive roller and idler roller also prevents large gaps where the products are transferred over.
The T-slots running along both sides (7 mm slot width) in the conveyor frame allow you to easily fasten the conveyors to machine frames or to attach side rails, sensors and other accessories. They also allow for the installation of a conveyor stand along the entire length of the conveyor frame to bypass projecting edges in machine beds, uneven floors and ledges.
The optional motor protection switch (MPS) acts as an interface for start/stop. It is installed in a separate IP54 PVC housing and is wired ready for connection with plug connections.
A base frame is not included in the scope of delivery. Please contact us if required!
The product can be customized to your needs. Please contact us.
Principais características
Widths: 100 / 150
Lengths: 1000 / 1500 / 2000
Conveyor belt: PU, white FDA, allows for restricted accumulated operation
Drive: AD head drive, 90 W / SEW / AC 230 V / 50 Hz / IP 54
Motor installation position: 0° horizontally under the belt, either on the left or right (default: left)
Speed: 6 m/min.
Total load: < 10 kg
Type of transport: Recommended forward, continuous operation
Power supply: optional motor overload switch, with external DC 24 V interface for starting/stopping
Driving roll: Ø 32 mm, w/o rubber coating
Tail: Ø 22 mm
Power transmission: chain drive
The motor protection switch is used for power supply of the motor and meets, with motor protection and a main switch, the requirements of the EC Machinery Directive (MRL) for a complete machine. In addition, a 24V DC interface is available for start/stop control. It is installed in a separate IP54 PVC housing and is wired ready for connection with plug connections. The supply voltage is 400V AC / 50 Hz / 16A.
Lengths: 400 to 3000 mm
Width: 75 mm
Total load: up to 15 kg (with width of 150 mm)
Speed: up to 15 m/min
Motor installation position: pointing downwards 90°
Belt types: from suitable to unsuitable for accumulated operation
Side rails
Stand systems
Angle fastening for table-top assembly or connection to machine frames
Soluções de baixo custo criadas com o RBTX
Agende uma videochamada gratuita com nossos especialistas
